earth-icon1
You’re currently viewing the Americas website.
AmericasAmericas
earth-icon1
You’re currently viewing the Americas website.
Would you like to switch countries or language?
    Blast Abrasives
    Waterjet Cutting
    Resources
    Categories
    Topics

    Topics

    Abrasive Blasting Case Studies GMA ToughBlast English Europe

    Low dust blasting increases efficiency for US Shipyard

    Overview

    Project

    A shipyard in New York Harbour switched blasting abrasives to trial GMA ToughBlast™ garnet blast cleaning two steel ocean barges.

    Location

    New York, USA

    Surface Area

    10,219m²

    Task

    Improve operational efficiency and reduce costs by addressing key issues associated with slag abrasives, including high dust levels and excessive abrasive consumption.

    Challenge

    High dust emissions, high consumption leading to frequent downtime for refilling, and costly disposal processes.

    Challenge 

    Previously using slag abrasives, the shipyard had to contend with several key issues affecting their operational costs and productivity – dust, disposal of slag and scheduling abrasive delivery to keep up with production. Furthermore, the blasting operations were mainly conducted at night due to high dust levels. The shipyard used GMA ToughBlast™ garnet for blast cleaning two steel ocean barges with a surface area of 10,219m² to a commercial blast of SP-6 and achieved significant results.

    Total consumption savings

    Using GMA ToughBlast™ , the shipyard experienced substantial savings of up to 70% in abrasive consumption. The total garnet consumption was only 250 tonnes compared to 825 tonnes of copper slag typically required for a project of this size. 

    70%

    Savings

    Using GMA ToughBlastTM

    Results

    The reduced consumption rate resulted in less downtime required to refill the blasting pots. Rather than refilling the eight-tonne blasting pot every 2.5 hours when using slag, the change to GMA ToughBlast™ allowed workers to continue blasting throughout the night shift without interruption for refilling, which could then be completed by the day crew. 

    As a further convenience, refilling the blasting pot during the day could be completed by bulk bags rather than two 25t bulk tankers of slag per day. The use of bulk bags also meant that regular flat-bed trucks could make the deliveries while production continued and to stay on top of deliveries.

    The result was an impressive increase in efficiency from each blaster covering 111m² per night (using slag) to between 139 to 185m² per night using garnet. 

    Low dust blasting with GMA Garnet™

    Blast cleaning using GMA Garnet™ abrasives provides significantly lower dust emissions due to its inherent material toughness and rapid settling (high specific gravity).  GMA Garnet™ is a naturally inert mineral, with its key characteristics  of hardness, toughness, angularity, and density making it one of the most effective and efficient abrasives.

    The lower dust emissions provide great improvements in operator visibility and safety on site while eliminating the constrain to only conduct blast cleaning at night due to the high dust levels created by slag abrasives.

    Topics

    Abrasive Blasting Case Studies GMA ToughBlast English Europe