Product Range

Blast abrasives engineered to perform

GMA Garnet™ sandblasting media cuts and cleans faster to optimize performance for any surface preparation project.

Product Range

Blast abrasives engineered to perform

GMA Garnet™ sandblasting media cuts and cleans faster to optimize performance for any surface preparation project.

Maximize productivity to meet project deadlines

GMA’s high-performance range of garnet blasting media is engineered to maximize productivity and significantly reduce the cost of surface preparation jobs.

Approved by paint manufacturers worldwide, GMA is the preferred choice of oil & gas companies, full-service shipyards, industrial contractors, and fabricators. From removing resistant coatings and heavy rust to delicate restoration work, GMA helps you complete projects on time and budget.

Maximize-productivity
OUR GARNET

The GMA advantage

GMA Garnet™ is a strong natural mineral that outperforms other abrasives due to its inherent hardness, toughness, density, and angularity. These qualities, when combined with the recommended equipment and air pressure, provide teams with unmatched performance, such as:

  • Fast removal of tough coatings
  • A deep anchor pattern
  • No surface embedment
  • A consistent surface profile.

AI generated image

What is an engineered blend?

GMA’s range of garnet blast abrasives are exclusively engineered blends, a mix of coarse and fine garnet grains, achieving the optimal balance between cutting and cleaning power.

AI generated image

Engineered blends, explained

Typical sandblasting media is generally one-dimensional, containing either coarse or fine grains. GMA's range of Engineered Blend garnet abrasives are a unique mix of coarse and fine garnet grains, achieving the optimal balance between cutting power and cleaning ability. 

Grain size matters

Coarse grains can cut through thick coatings and create a deep surface profile, but leave behind significant surface embedment. Used alone they cannot thoroughly clean small valleys or pits, resulting in slow cleaning rates, high abrasive consumption, and a higher risk of corrosion and coating failure.

The cause for change

Fine grains produce a cleaner surface and are more efficient at removing thin coatings like mill scale than coarse grains. However, they are ineffective for thick coating removal and cannot produce the deep surface profile depth required for many industrial coatings.

In choosing traditional abrasives, coatings can either be removed, or the surface can be cleaned – not both at the same time.

A more efficient abrasive

GMA Garnet™ Engineered Blends deliver optimised blasting performance in specific applications. Coarse grains cut through coatings fast and create the required profile depth, while fine grains clean the anchor profile and improve blasting efficiency.

GMA Garnet™ delivers fast and effective coating and rust removal at the lowest possible consumption rate, leaving the cleanest surface ready for inspection and coating application.

Why is GMA Garnet the preferred sandblasting media?

Achieve safe, effective blasting with minimized consumption and unmatched coating adhesion.

Surface-quality-icon

Surface quality

Our garnet creates the required surface profile with minimal embedment or contamination, and produces higher peak density.

High-productivity-icon

High productivity

GMA reduces your costs with significantly higher blast production rates, giving you shorter project time lines.

Reduced-consumption-icon

Reduced consumption

Lower your abrasive consumption by 30-50%, giving you savings in abrasive purchase costs, as well as transport, storage and disposal costs.

Worker-safety-icon

Worker safety

Garnet is a chemically inert mineral, with little to no heavy metals creating worker health and safety risks or environmental contamination.

Low-dust-blasting-icon

Low dust blasting

Our garnet fractures less on impact, drastically improving operator visibility and reducing site contamination.

Sustainable-resource-icon

Sustainable resource

Our garnet recovery programs offer a cost-effective and environmentally responsible solution for the disposal of used garnet.

Blast cost calculator

How much can you save with GMA Garnet?

Your abrasive is costing you more than just it’s price. Find out how GMA can save you money with higher productivity, and lower consumption and disposal costs.

Save-with-GMA-Garnet

Explore the range

GMA’s range of engineered blend abrasives optimizes your blasting performance in any project.

GMA PremiumBlast™

Efficient & cost effective all-round performance for removal of medium to heavy rust and industrial coatings.

Surface profile

60 - 85 µm

Blasting rate

Up to 25 m2/hr

Consumption rate

As low as 14 kg/m2

Learn More
GMA SpeedBlast™

Fast blasting performance for removing light to medium coatings and rust, producing exceptional surface quality.

Surface profile

50 - 75 µm

Blasting rate

Up to 25 m2/hr

Consumption rate

As low as 10 kg/m2

Learn More
GMA NewSteel™

The fastest mill scale and light rust removal abrasive that minimizes consumption and keeps costs down.

Surface profile

40 - 65 µm

Blasting rate

Up to 35 m2/hr

Consumption rate

As low as 7 kg/m2

Learn More
Contact GMA

Find out how to optimize your next project

Speak to your regional GMA expert to request a sample or demo, or make a product inquiry.

Speak-to-an-expert